15 Easy Tips to Repair Cracked Concrete Surfaces


Concrete is a durable material, but it is still susceptible to cracking due to various factors such as weather conditions, heavy traffic, and foundation issues. If you ignore these cracks, they can lead to further damage and safety hazards. But with a few simple steps and using the right products, you can quickly restore the beauty and functionality of your concrete surfaces. Here are tips to help you correctly repair your driveways, patios, and walkways. 

Assess the Damage

Lubo Ivanko/Getty

Before starting repairs, thoroughly inspect the concrete surface to identify cracks, spalling, or uneven areas. Determine the extent of the damage and plan appropriate repair methods and materials.

Clean the Surface

Olga U/Getty

Use a pressure washer or stiff brush to remove dirt and loose material from the concrete surface. Cleaning the surface ensures better adhesion of repair materials and improves the appearance of the repaired area.

Fill Cracks


For small cracks that are less than a quarter of an inch wide, use a concrete crack filler or epoxy resin. Fill the crack and smooth the surface with a putty knife. For larger cracks use a concrete patching compound. You can find various brands at your local hardware store. 

Repair Spalled Areas

Bin Kontan/Getty

Spalling occurs when the surface of the concrete flakes or chips away. Remove loose or damaged concrete with a chisel and hammer, then fill the area with a concrete patching compound. Smooth the surface with a trowel for a complete finish.

Level Uneven Surfaces

Sergii Petruk/Getty

Use a concrete grinder or a leveling compound to correct uneven areas on driveways, patios, or sidewalks. Follow manufacturer instructions carefully and ensure the surface is level and smooth before proceeding with further repairs or resurfacing.

Resurface the Concrete


Consider resurfacing the concrete if the damage is extensive or the surface is severely worn. Apply a concrete resurfacer according to manufacturer instructions, using a trowel or squeegee to create a smooth and uniform finish.

Seal Cracks and Joints


After repairing cracks and joints, apply a concrete sealer to prevent moisture from penetrating the cracks and further damage. Choose a sealant suitable for the specific conditions of your driveway, patio, or sidewalk, such as weather-resistant or UV-resistant formulas.

Reinforce with Rebar or Mesh


Reinforce the concrete with rebar or wire mesh in areas prone to heavy traffic or structural stress. Place the reinforcement material within the concrete during repairs to strengthen the concrete and improve durability.

Prevent Water Accumulation

Lari Bat/Getty

Ensure proper drainage around concrete surfaces to prevent water from pooling, which can lead to erosion and damage over time. Install drainage channels or slope the surface away from buildings and structures to redirect water flow.

Apply a Concrete Bonding Agent

Bogdan kurylo/Getty

Before applying repair materials, coat the surface with a concrete bonding agent to improve adhesion and bonding strength. Follow manufacturer instructions for the correct application and drying times.

Use Quality Repair Materials

Vladyslav Horoshevych/Getty

Invest in high-quality repair materials and follow manufacturer guidelines for mixing and application. Using inferior or improper materials can compromise the longevity of the repairs.

Protect Surrounding Areas

Frank Armstrong/Getty

When repairing, take precautions to protect surrounding landscaping, structures, and surfaces from damage or staining. Use drop cloths, tape, or protective barriers to contain repair materials and debris around plants and flowerbeds.

Allow Sufficient Drying Time


Proper curing is essential for the effectiveness of concrete repairs. Per manufacturer instructions, allow adequate drying time before subjecting the repaired surface to foot traffic, vehicles, or other stressors. The drying time will depend on the type of brand you’re using. 

Monitor and Maintain Regularly

Liia Galiziamnova/Getty

After completing repairs, regularly monitor the concrete’s condition and promptly address any new cracks or damage. Routine maintenance, such as sealing and cleaning, helps prolong the life of the concrete and prevents future issues

Seek Professional Help if Needed

Patcharee Pornsipak/Getty

Consider hiring a professional with experience in concrete repair and restoration for extensive damage. A qualified contractor can assess the situation accurately and recommend the best course of action for long-lasting results.


Leave a Reply